Modem and Router Passwords

For the advance user who know how to configure their modem/router,this would be helpful.

Here are the list of the default password for different modem/router ( All are Streamyx supported) :

1. RIGER DB102 ( Most of the customers who register nowadays will get this type of modem)

• IP Address: 192.168.1.1
• username : tmadmin
• password : tmadmin

2. BILLION modem:

• IP Address: 192.168.1.254
• username: admin
• Password: password

3. ZTE modem

• IP Address: 192.168.1.1
• i. username: ADSL
• password: expert03
• ii. username: ZXDSL
• password: ZXDSL
• iii.username: admin
• password: telekomst

4. ARTNET modem:

• IP Address: 192.168.1.1
• i. username: admin
• password: 1234
• ii. username: admin
• password: telekomst
• iii. username: admin
• password: admin
• iv. username: admin
• password: password

5. AZTECH modem:

• IP Address: 10.0.0.2 OR 192.168.1.1
• i. username: admin
• Password: admin
• ii. username: admin
• Password: password
• iii. username: admin
• Password: blank ( type "blank,not leave the column blank)

6. KASDA modem:

• IP Address: 192.168.1.1
• username: admin
• password: telekomst

7. D-LINK

• IP Address: 192.168.1.1
• username: admin
• password: admin

8. TRIZ modem:

• IP Address: 192.168.1.1
• username: admin
• password: aaaaaaaa

9. TP-LINK :

• IP Address: 192.168.1.1
• username: admin
• password: admin

10. HUAWEI:

• IP Address: 192.168.1.1
• i. username: admin
• ii. password: admin

Any additional info about other modems or routers, just leave the comment.Thanks!

###############################################################

*Looking for a good web host? Checkout the Bluehost Review

*Looking for data recovery service? Click here

*Looking for software help desk? Check this out

*Looking for anti spam solutions? Checkout the Syronex

*Looking for broadband phone service provider? Visit this website

Create Manual Dialer

Here I will show you the basic thing in order to make connection.
Actually, there are 2 types of connection setting:

i. Automatic connection- router has been configured with the setting required and will act as a dialer. No need to manually dial everytime the user want to make connection.This is the most convenient and preferred way by most of the user in order to get Streamyx connected.

ii. Manual dialer - This either the user do not own a router or simply choose to dial manually everytime to get connected to Streamyx.

As it would be appropriate for us to get start from the basic, I will show the steps on how to create manual dialer first.

1.Click on Start button>All Programs>Accessories>Communications>New Connection Wizard

click on the image to enlarge the picture


or alternatively, Go to Control Panel(Classic View)>Double-click on Network Connection>click on Create New Connection Wizard


2. New Connection Wizard window will appears stating "Welcome to the New Connection Wizard" > click on Next

click on the image to enlarge the picture


3. Choose the 1st one- 'Connect to the internet'

click on the image to enlarge the picture


4. Choose the 2nd one- 'Setup my connection manually'

click on the image to enlarge the picture




5. Choose 'connect using a broadband connection that requires a username and a password'

click on the image to enlarge the picture




6. Fill in ISP name- this will be the name of the dialer (If you type ABC,then ABC will be set as the name of the dialer),usually 'Streamyx' is preferred.

click on the image to enlarge the picture




7.Key in the username(case sensitive),password and confirm password.Username format is "username@streamyx". Also tick the 2checkboxes

click on the image to enlarge the picture




8. Completing the new connection wizard > Tick add a shotcut to this connection to my desktop > Click Finish

click on the image to enlarge the picture




9. Go to desktop > double click on the dialer

click on the image to enlarge the picture




User also can access the dialer at Network Connection > Double click the dialer




10. The connection window will pop up > Just click connect as the username and password has been saved while setting the dialer.

click on the image to enlarge the picture


###############################################################

*Looking for a good web host? Checkout the Bluehost Review

*Looking for data recovery service? Click here

*Looking for software help desk? Check this out

*Looking for anti spam solutions? Checkout the Syronex

*Looking for broadband phone service provider? Visit this website

Limited or No Connectivity

Have you ever facing Limited Or No Connectivity problem with your network?
or your network connection gets stuck "Acquiring IP Address"?
Why is it happen and how to fix it?

Limited or No Connectivity is due to assigning problem between IP to your LAN Connection.
By right, your IP should be assign with the 192.168.x.x but it assign an IP which in group 168.x.x.x .
(you can check this by running Run>cmd>ipconfig)

click picture to enlarge



Many user just simply disable the message by untick the "Notify me when this connection has limited or no connectivity" check box", this basically would not solve the problem.
Do you understand what does "notify" means? I'm pretty sure the answer is YES.
So,if you untick the "Notify me when this connection has limited or no connectivity" checkbox, you will get notified when the problem arise.
But then,if you untick the checkbox,the meaning would be like "Do Not Notify me when this connection has limited or no connectivity".
You will end up wondering that you have fix the problem but it is actually still there.
Am I right or Am I right?

Normally 192.168.1.1 is the IP for your router which is also called the gateway IP.
Just follow the few steps, and try wether it works or not.(The following steps work for the router using 192.168.1.1 IP)

1.Click on Start button>All Programs>Accessories>Communication>Network Connection

click picture to enlarge




2.Right click the Local Area Connection and go to properties.

click picture to enlarge




3.Find the entry called "Internet Protocol (TCP/IP)" and double click it. or highlight it then click on properties.

click picture to enlarge




4.It should be set to "Obtain an IP address automatically", set it to "Use the following IP".

click picture to enlarge




5.In the IP address field type: 192.168.1.xxx (replace xxx with any number between 2 to 255)
I just choose number 8 because 8 is 'ong' mah, so hopefully it bring luck to solve the problem.

Just click on the Subnet mask field and Windows should fill it in automatically.

In the Default gateway field type: 192.168.1.1 (your modem's gateway IP)
The next radio button should already be set to "Use the following DNS server addresses", if not set it.
In the first field type 202.188.0.133 and 202.188.1.5 for the second field.This is TMNet DNS number.

Close both the open windows with OK. wait for a few seconds or you can off the modem about 10 seconds and on it back.

click picture to enlarge


Now see if the computer can connect to the network.

###############################################################

*Looking for a good web host? Checkout the Bluehost Review

*Looking for data recovery service? Click here

*Looking for software help desk? Check this out

*Looking for anti spam solutions? Checkout the Syronex

*Looking for broadband phone service provider? Visit this website

Upgrade Mailbox Capacity

Do you know how much is the default capacity of Streamyx mailbox?
Yes, it's just 4MB.
Now, let's steal 6MB of capacity from TMNet into your mailbox,
and make it 10MB. Just follow these simple steps and you will get it for FREE!

1. Visit this website : https://tmbill.tm.net.my/
Key in your TMNet Streamyx username (without @streamyx) and password.
Choose 'Streamyx' for service.

click picture to enlarge




2. You will be directed to Main Menu page with your name appears as the welcome note.
Scroll down until you find "Subscribe to bigger mailbox for username@streamyx.com"
link under Online Registration.Click it.

click picture to enlarge




3. On the next page, you can read the pricing list and you can see that the monthly
fee for 10MB is free! Click Next.

click picture to enlarge




4. Tick the checkbox at the bootom "Yes, I have read and understood the terms and agreement".
Click SUBSCRIBE!

click picture to enlarge




Now, go to http://webmail.tm.net.my and check your mailbox capacity. Yes, now it's 10MB!

Change Your TMNet Streamyx Password

This will show you on how to change your password for both Streamyx login and email.
*Useful tips: If your modem/router has been configured automatically for auto-dialer,
that means the login password has been configured and saved.
If you change the login password to different pasword, your modem/router
will keep dialing using the old password resulting the connection failure.
So, if you are not sure on how to configure your modem/router, please seek
help from the expert.



1. Visit this website : https://tmbill.tm.net.my/
Key in your TMNet Streamyx username (without @streamyx) and password.
Choose 'Streamyx' for service.

click to enlarge the picture




2. You will be directed to Main Menu page with your name appears as the welcome note.
Click Change Password link under Account Management

click to enlarge the picture




3. Please key in the Old Password, New Password and Confirm New Password.
DO NOT CLICK SUBMIT YET!!
Instead, click Individually change password for each services

click to enlarge the picture




4. Then, you will be directed to another page.
You will see 3 different service type and you can notice there are 3 chechboxes on the
right side. Tick the checkbox if you don't want to change the password for that service.
Key in back the Old Password, New Password and Confirm New Password as entered before.
Now, you can click Update to submit the request.

click to enlarge the picture



Simple is it?

EZ Net 1315

Did you ever heard about EZnet 1315?

EZnet 1315 is a pre-activated Internet narrowband service and is available to all TM fixed line subscribers nationwide.
TM fixed line subscribers with a PC and narrowband modem may access the Internet by only dialing 1315.
EZnet 1315 gives you an attractive alternative to Internet dial-up access which provides internet connectivity and convenience in one single service.

How much does it cost?

• Charged at only 4 sen per minute
• No additional registration or annual fee
• Charges will be based on usage only, ‘no usage – no charge’

How to connect to 1315 if you have TM homeline installed at your house?Just follow these simple steps:

1.Click on Start button>All Programs>Accessories>Communications>New Connection Wizard




or alternatively, Go to Control Panel(Classic View)>Double-click on Network Connection>click on Create New Connection Wizard

2. New Connection Wizard window will appears stating "Welcome to the New Connection Wizard" > click on Next





3. Choose the 1st one- 'Connect to the internet'





4. Choose the 2nd one- 'Setup my connection manually'





5. Choose 'connect using a dial-up modem'





6. Key in the name of the dialer - EZ Net (any name will do)





7. Phone number- key in 1315





8. Username and Password - Just leave it blank and tick both checkboxes





9. Tick another checkbox 'add a shortcut to this connection to my desktop' and hit FINISH button.





Now,you are ready to connect to EZ Net,just click on the EZ Net icon on your desktop and click connect.That's it!

Hearty Welcome

Dear friends,hearty welcome to StreamyxZone, a blog dedicated to provide better understanding,easy troubleshooting and useful knowledge to all Streamyx users. I take pride in introducing my newly build StreamyxZone blog to all of you.

I would like to assure you that StreamyxZone are far from complete and for the time being,just a simple setting and troubleshooting will be posted.More posting will be added gradually time to time. I hope that this blog will be a good guidance and reference in terms of it's contents which mainly targeted to Streamyx users. I am incredibly proud to be able to share my work in progress, and eagerly anticipate your feedback,comments or suggestions.
Thanks for your time and support.



Click Here for your Free Traffic!